Home Forums HTBasic Forum UNLOAD a BIN system program

This topic contains 4 replies, has 2 voices, and was last updated by  ZeRider 3 weeks, 3 days ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #483

    ZeRider
    Participant

    Hi,
    Do you know if there is a software method to remove for example a SERIAL interface driver loaded with a LOAD BIN command and visible inside the device setup box ?
    (without use the device setup box REMOVE button)

    #484

    tsg_sh
    Participant

    There is an undocumented feature availale to unload a serial driver.

    LOAD BIN "SERIAL;COM1 9"  ! loads serial driver for COM1, ISC=9
    
    CONTROL 9,1256;0          ! unloads the driver

    Please note that the driver is still visible in the device setup.

    • This reply was modified 1 month ago by  tsg_sh.
    #487

    ZeRider
    Participant

    Thanks tsg_sh

    I have tested your command, it’s working very well.
    It’s a very good improvement.

    It only remains to find how to remove the driver from the device setup now … 🙂

    #488

    tsg_sh
    Participant

    It’s not possible to remove it from the Device Setup at the moment.
    At the time TransEra implemented this command for one of our customers they said that it would be quite difficult to remove it from the DS so they didn’t do this.

    #489

    ZeRider
    Participant

    Ok, we’ll live with that …
    Thanks 🙂

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.