This attribute specifies the value that VALUE will have when the needle is at the maximum end of the METER. MAXIMUM must be greater than MINIMUM. The value of MAXIMUM will be displayed with only one digit to the right of the decimal point.
For example, if you set the value of MAXIMUM to 123.4567, the display will show 123.5. If you set the value of MAXIMUM to 0.0001375, the display will show 1.4E-4.
If you need to display numbers in a different way for your application, you can set the value of MAXIMUM as a string. For example, if you want to display 0.000237 or 4.167E-4, set the value of MAXIMUM to the string 0.000237 or 4.167E-4 in the ASSIGN or CONTROL statement.
