WIN-PRINT STATUS Registers
|
The following STATUS registers are supported.
|
0
|
Interface identification. Returns a 302 for ISC 10; 300 for ISC 26.
|
|
104
|
Get left margin. Units are 1/100’s mm. Default is 1270.
|
|
105
|
Get top margin. Units are 1/100’s mm. Default is 1270.
|
|
106
|
Get right margin. Units are 1/100’s mm. Default is 1270.
|
|
107
|
Get bottom margin. Units are 1/100’s mm. Default is 1270.
|
|
108
|
Get line spacing. Units are 1/100’s mm.
|
|
109
|
Get the current print position. Units are 1/100’s mm. Register 109 gets the X and register 110 gets the Y values.
|
|
110
|
Get the current print position. Units are 1/100’s mm. Register 109 sets the X and register 110 sets the Y values.
|
|
111
|
Retrieve the "page dirty" flag. A value of 0 means no output exists yet on this page. A value of 1 indicates output has been made to the current page, but the print job is not yet complete.
|
|
112
|
Returns the PRINTER IS auto eject status: 0 = auto eject off; 1 = auto eject on.
|
|
113
|
Returns the DUMP auto eject status: 0 = auto eject off; 1 = auto eject on.
|
|
114
|
Returns the associated printer’s paper orientation: 1 = portrait; 2 = landscape.
|
|
116
|
Returns the font style for the associated printer:
0 = Normal
1 = Italic
2 = Bold
3 = Bold Italic
4 = Underline
5 = Underline Italic
6 = Bold Underline
7 = Bold Italic Underline
|
|
117
|
Returns the font point size for the associated printer
|
|
154
|
Returns X1 or the beginning row for specifying partial screen dumps see GESCAPE PRT,106
|
|
155
|
Returns Y1 or the ending row for specifying partial screen dumps
|
|
156
|
Returns X2 or the beginning column for specifying partial screen dumps
|
|
157
|
Returns Y2 or the ending column for specifying partial screen dumps
|