Configures local IEEE-488 device parallel poll response.
PPOLL RESPONSE {@io-path | interface-select-code} ; service
Usage:
PPOLL RESPONSE Isc;Answer
PPOLL RESPONSE @Gpib;1
Description:
PPOLL RESPONSE enables or disables this device to respond to a parallel poll request from the IEEE-488 bus active controller. If an I/O path is specified, it must refer to the IEEE-488 interface. A service value of zero disables the parallel poll response, whereas a value of one enables the parallel poll response. The device must be configured for a parallel poll response with the PPOLL CONFIGURE command. It specifies which bus data bit to respond on and the logical sense of the response.
